The main feature that identifies fuzzy systems is the fine droplets they produce. It is this delicacy of the droplets that distinguishes mist from other forms of water use, and it is what makes this technique so useful for a variety of applications. The mist droplets are typically 30 micrometers to 70 micrometers in diameter.
Some companies suggest that even droplets as small as 10 microns can be considered mist. It is critical that the dimensions of the droplets produced by the mist system are matched to the requirements of the individual application. To achieve effective evaporative cooling, the droplets must evaporate as quickly as possible. However, if you are also looking for a water misting system then visit https://www.youmist.com.au/.
Image Source: Google
The size of the droplets affects the speed at which they evaporate. Under normal circumstances, tiny droplets evaporate much quicker than large ones. Therefore, the efficiency of the nebulization system is strongly influenced by the size of the resulting droplet.
Components of misting systems:
Its main components are pressure pumps, filters, controls, pipes or pipelines, fittings, and nozzles. The pressure pump must be dimensioned according to the outlet flow rate, which is generated by the number of nozzles in the system.
Temperature or humidity, or both, can be used as inputs to control the fog system. Ideally, the piping should be rated up to 3 times the operating pressure of the system for safety reasons. All fittings must be corrosive and nozzles must be selected based on the quality of the mist produced.
Different fog systems:
There are 3 common types of fog systems on the market today; Low pressure, medium pressure, high pressure. Low-pressure systems are more commonly used in agriculture, horticulture, and homes.